Chemically inert flangeless fitting with permanently attached PTFE ferrule ideal for repeat connect/disconnect
Pressure rated up to 1000psi (69 bar)
For 1/16” or 1/8” OD semi-rigid tubing
For 1/4”-28 UNF or M6 flat-bottom ports
The Dibafit™ Gripper fitting system uses a one-piece ferrule which fits permanently onto the outside of semi-rigid tubing. Ferrules have an inner PTFE sealing face ensuring that only PTFE is in the fluid path. The outer casing is stainless steel or PEEK™. The fitting nut can spin freely, eliminating tubing twist and allowing easy repeat connect/disconnect. The system is pressure rated up to 1000psi (69 bar).
A range of different colored polypropylene nuts are available
to connect 1/16” or 1/8” OD tubing into ¼”-28 UNF flat-
bottom ports. Mixed color packs include all 10 colors for easy
line identification. PEEK™ fitting nuts for use in higher
temperatures are available in standard or compact head
styles and with ¼”-28 UNF or M6 threads. An ETFE blanking
plug with a PTFE sealing face is available to seal unused
ports. These blanking plugs can be used in any flat-bottom
1/4”-28 UNF port.
Technical specifications
Operating pressures: stainless steel case ferrules
1/16”, 1/8” OD tube in 4”-28 or M6 ports 1000psi (69 bar)
3/16” OD tube in 5/16”-24 ports 200 psi (14 bar)
Operating pressures:PEEK™ case ferrules
1/16” OD tube in 4”-28 or M6 ports 800psi (56 bar)
1/8” OD tube in 28 or M6 ports 600 psi (42 bar)